AZTools.us
English

Passport & ID Photo Maker (2×2 in, 35×45 mm, 4×6 cm)

Document frame with head guides 300 dpi photo or 4×6 in sheet

Passport Photo Maker settings

Load a file to unlock this tool’s controls:

Document frame with head guides

Runs directly on the web inside your browser. Your original file is never modified or uploaded.

Passport, visa and ID applications ask for a photo of an exact size, with the head at a set height and usually a plain light background. This tool turns a phone picture into that photo: choose the document, line your head up with the guides, change the background if needed, and save a 300 dpi photo or a 4×6 inch sheet of copies to print. Your photo stays in your browser.

Updated

How to make a passport photo

  1. Drop a .jpg, .jpeg, .png, .webp, .heic or .heif photo onto the workspace. Use a well-lit, front-facing picture with the whole head and the top of the shoulders.
  2. Choose the “Document”: US passport & visa 2×2 in, Schengen / EU or UK 35×45 mm, Canada passport 50×70 mm, China visa 33×48 mm, Vietnam passport 4×6 cm, ID photo 3×4 cm or a generic 35×45 mm. The pixel size at 300 dpi is shown next to each.
  3. Drag the photo to move it and scroll or use “Zoom” to resize it until the top of your head touches the dashed line and your chin falls inside the blue band. Use “Straighten” if your head is tilted; arrow keys and + / − work too.
  4. Under “Background”, keep the original or choose “White”, “Light grey” or “Light blue”. The first time, this downloads the background model (about 66 MB) and then separates you from the background in the browser.
  5. Pick the “Layout”: “One photo” for online applications, or “4×6 in print sheet” for as many copies as fit on a standard photo print, with thin cutting lines.
  6. Export. The JPG has 300 dpi written into it, so it prints at the right size.

Sizes and head heights

The guides place the crown near the top of the frame and the chin band where the official head height ends. For sizes without an official head height the band is labelled as a suggestion. Some Schengen countries use their own head heights, and rules change, so check the issuing office’s page before you submit.

Document sizes in this tool
DocumentPhoto sizeHead height (chin to crown)Pixels at 300 dpi
US passport & visa2 × 2 in (51 × 51 mm)25–35 mm (1–1⅜ in)600 × 600
Schengen / EU35 × 45 mm32–36 mm413 × 531
UK passport35 × 45 mm29–34 mm413 × 531
Canada passport50 × 70 mm31–36 mm591 × 827
China visa33 × 48 mm28–33 mm390 × 567
Vietnam passport4 × 6 cmnot specified472 × 709
ID photo3 × 4 cmnot specified354 × 472

Tips for a photo that is accepted

  • Face the camera, neutral expression, mouth closed, both eyes open; no glasses glare, no hair over the eyes.
  • Even light without shadows on the face or behind you. A white or light background replaced by the tool still needs a clear outline: avoid hair blending into a busy background.
  • Online forms often have a file size limit too; the Compress Image to KB tool can bring the photo under it without changing the pixel size.

Passport Photo Maker: common questions

Can I print the 4×6 sheet at a photo shop?
Yes. Order a 4×6 inch (10×15 cm) print at actual size, without cropping or “fit to page”. Cut along the thin grey lines.
Does the tool check that my photo will be accepted?
No. It sets the size, resolution and background and shows where your head should be, but it does not judge expression, lighting or glasses. Compare with the official requirements before you submit.
Is my photo uploaded?
No. Positioning, background replacement and export all happen in your browser tab. Only the background model is downloaded, once, and your photo is never sent.