AZTools.us

MP3 Cutter & Audio Trimmer

Waveform trim handles + fade Instant MP3 cut & export

Adjustments

Load a file to unlock this tool’s controls:

Waveform trim handles + fade

Runs directly on the web inside your browser. Your original file is never modified or uploaded.

How MP3 Cutter & Audio Trimmer Works

This cutter trims an MP3, WAV, M4A, OGG, FLAC or AAC file on its waveform, in your browser. You can keep one section (an intro, a chorus, a quote from a recording) or remove a section from the middle and close the gap. Optional fades soften the cut, a volume control lifts quiet files, and the result is saved as MP3, M4A or WAV.

How to cut an MP3

  1. Drop an audio file onto the workspace, or click to choose one.
  2. Choose “Keep” to export only the selected part, or “Remove” to cut it out and join what comes before and after.
  3. Drag the amber “Selection start” and “Selection end” handles, or type exact times into “Start” and “End” (m:ss.s). With a handle focused, the arrow keys move it by 0.1 s (Shift: 1 s). Space plays and stops, I and O set the start and end at the playhead, Ctrl+Z undoes a selection change.
  4. In Keep mode, click the “Fade in” or “Fade out” button on the waveform to turn a fade on, then drag its dot to set the length.
  5. Press “Preview result” to hear exactly what will be exported. Set “Volume” and “Quality” if needed, pick the format in the menu next to the export button, and press the export button (for example “Export .MP3”).

Settings and their limits

The shortest selection is 0.4 seconds. The summary next to the export button (hidden on phones) shows the result length, format and sample rate before you export.

MP3 cutter controls
ControlWhat it does
Keep / RemoveKeep exports the selection. Remove exports the rest of the file; the two parts are joined with a 20 ms equal-power crossfade (shorter if one side is shorter), so the join does not click
Fade in / Fade outOff by default; 2 s and 3 s when first turned on. Adjustable from 0.1 to 10 s, and never longer than 45% of the output, so the two fades cannot overlap. Not available in Remove mode
Volume50–200% (100% by default). Above 100%, a limiter holds peaks at −1 dBFS so the louder file does not clip
QualityMP3: 64, 96, 128, 192 or 320 kbps (192 by default). M4A (AAC): 96–256 kbps (128 by default). WAV is 16-bit and has no quality setting

Listening while you edit

Clicking the waveform inside the part that will be exported plays the processed result from that point, with your fades and volume. Clicking a part that will be cut away plays the original there, so you can find the exact edge of a word or beat before moving a handle.

The file keeps its own sample rate. MP3 only allows rates up to 48 kHz, so a 96 kHz file becomes 48 kHz and an 88.2 kHz file 44.1 kHz; low-rate recordings are capped at 160 kbps (16–24 kHz) or 64 kbps (below 16 kHz). The summary says “(resampled)” when this happens. If the browser has no AAC encoder, the M4A option is marked as not supported.

Questions

Does cutting an MP3 lower its quality?
The file is decoded and encoded again, so an MP3 goes through a second lossy encode. Keep the bitrate at 192 kbps or higher, and if you will edit the result again, export WAV, which is uncompressed.
Will I hear a click where I removed a section?
No click: in Remove mode the two parts overlap for 20 ms with an equal-power crossfade, so there is no sudden jump in the waveform. A join in the middle of a word or a held note can still sound abrupt, because the sound itself changes. Move the handles slightly into a pause and preview again.
Is my file uploaded?
No. Decoding, cutting, fading and encoding all happen in your browser tab.